Keen Bench Holding Ovens

Buy Online or call 888-763-6836 (USA only)


electrode ovens
- portable
- floor
- bench
- reconditioning

flux ovens
mig & tig ovens
nitrogen purge ovens
oven descriptions
 
Corporate Sales
 

 


(Click on link below picture for prices)

Model


K-200
Click Here for Prices and More Info

K-450
Click Here for Prices and More Info

K-4RS
Click Here for Prices and More Info

K-4RSD
Click Here for Prices and More Info
Part Number #010301 (120v) #010402 (120v) #010503 (120v) 010511 (240V)
120V also available)
#010303 (240v) #010401 (240v) #010504 (240v)
Electrode Capacity 200 lbs (90.7 kg) 18" (45.7) rods 450 lbs (204.1 kg) 18" (45.7cm) rods 4 Each 12" Spools 4 ea 12" Spools and 5 ea standard 10 lb. tubes 
of 14" rods
Available Volts 120v or 240v  120v or 240v 120v or 240v  120v or 240v
Watts/Heating Element 500W 1000W 500W 500W
Temperature Range Range 150°-300°F (38°-149°C)
150-550 F (65-288 C) 50°-250°F
(10°-121.1°C)
50°-250°F
(10°-121.1°C)
Thermostat Dial Adjustable
Dial Adjustable Dial Adjustable  Dial Adjustable
Insulation 1" (2.54 cm) thermal insulating wool 2" (5.08 cm) thermal insulating wool 1" (2.54 cm) thermal insulating wool 1" (2.54 cm) thermal insulating wool
Interior Dimensions/ 12.5" (31.75 cm) x 12.5" (31.75 cm) x 18.25" (46.35 cm) 19.5" D (49.53 cm) x 20" (50.80 cm) 18" (45.72 cm) x 18" (45.72 cm) x 18" (45.72 cm)
18" (45.72 cm) x 18.5" (46.99 cm) x 18" (45.72 cm)
External Thermometer No No No Optional
Net Weight 53 lbs. (24.04 kg) 73 lbs (33.11 kg) 79 lbs. (36kg) 80 lbs. (36 kg)
Shipping Weight 66 lbs (29.94 kg) 90 lbs (40.82 kg) 90 lbs. (40.82 kg) 120 lbs. (54.43 kgs)
Shipping Dimensions 19.5" (49.63 cm) x 17.5" (44.45 cm) x 26" (66.04 cm) 26" (66.04 cm) x 28" (71.12 cm) x 26" (66.04 cm) 26" (66.04 cm) x 28" (71.12 cm) x 26" (66.04 cm)  26" (66.04 cm) x 28" (71.12 cm) x 26" (66.04 cm)
Power Cord Length 8 ft. 8 ft. 8 ft. 8 ft.
Pilot Light Yes Yes Yes Yes
Approvals CSA Approved CSA Approved No No

 

Our bench holding ovens are an excellent choice for small to medium sized shops. Too large to be considered portable, yet small and light enough when empty to be picked up by a single person, bench ovens are an economical choice when a large floor oven is not required. These models are designed to be placed upon a bench or other stable surface for easy loading and unloading of welding consumables. Electrodes and wire can be stored in bench ovens at optimum temperature to fight off harmful moisture absorption in the flux coating and core. Some bench models available at Rodovens.com can be shipped by U.P.S.

Please Note: Products and specifications shown on website may vary from actual 
product and may contain optional equipment available at additional cost.