Brief Product Description

Designed with the aviation and aerospace GTAW welding professional in mind, the Keen KT-99-4-2-NP mixed-use, welding consumable storage oven with inert gas purge system is the ultimate clean storage solution for TIG filler rod and welding wire spools. Preventing an oxide layer from forming on the consumable surface is always a concern for GTAW professionals, and storing aluminum TIG filler wire and spooled wire in the KT-99-4-2-NP inert gas purge welding oven will provide confidence that valuable TIG rod alloys are protected from the degrading effects of atmospheric exposure. Keen's unique inert gas purge system is designed to allow the user to purge moisture-carrying oxygen from the cabinet and replace with pure inert gas. Nitrogen and Argon are the standard medium for contamination-free storage because they are relatively inert - they neither react with stored materials nor carry moisture - and because they can be isolated and purified relatively inexpensively. Because these inert gases have a lower-specific gravity than air, when introduced into the oven they immediately purge air that may contain contaminants or moisture. Keen inert gas purge TIG filler wire welding ovens are often used for highly sensitive applications in the nuclear, marine, aerospace and aviation industries The unique, lockable Lexan door allows welding professionals to view the contents without opening the oven, and to make sure expensive alloys are kept secure. Standard digitally-adjustable, ON/OFF microprocessor-based controller with ±1 degree accuracy, over-temperature control, welded door hinges, forklift pockets and much more. Maximum temperature 250F. Customer must supply gas and flowmeter. Made in USA.